Jumat, 31 Juli 2015

Why Fixing Your Car Yourself Costs You Money

We all know how auto repair is not cheap. That's why it's very tempting to fix your car yourself. There are YouTube videos and forums all over the Internet claiming to give you "correct" information on how to fix your car all by yourself. Even if you have the correct information, you probably don't have the expensive, special tools that a lot of cars require to fix it correctly.


Fixing your car yourself is a lot like playing a slot machine. If you're lucky you'll get three cherries and save a ton of money. But, usually what happens is you get three lemons and that slot machine reaches out and grabs your wallet for much more than you would've paid a qualified mechanic to fix your car in the first place. It's a lot easier knowing what to do, then what not to do. That's why we won't always be able to help you if you've completed a job and still have problems. We don't know what you've done and what you forgot to do. We also don't know what parts you forgot to include or bolts you forgot to tighten.

Fixing your car yourself is like playing a slot machine.

We had a potential customer call this week with a 2006 Mazda 3 who had changed his own timing chain. He was now getting multiple engine codes coming from his ECM. Because of the complex nature of this engine AND the special tools required AND one time use parts that must be replaced when doing this repair, we told this customer we could not help him. Unfortunately, now this person is in quite a pickle because (as he admitted to us) not even the dealer will work on this vehicle.

2006 Mazda 3

If you do decide to fix your own vehicle, please make sure you are able to successfully complete it. Changing your own battery or a fan belt is one thing, but attempting a major repair without the special tools or more importantly the knowledge to do it can costs you way more than you could be saving.

Listen to advice and accept instruction, that you may gain wisdom in the future. Proverbs 19:20

Happy Friday!

Selasa, 28 Juli 2015

What's your comfort zone?

As car owners, we push a few buttons or turn some knobs, and voila, we have warm air blowing on our feet or cool air chilling our face. How does all that happen? Well, it’s all thanks to the air blend box. This box lives behind the dash and conveys just the right temperature of air right where it is wanted.

Let’s break it down. First there is the blower fan that circulates the air through the heating/air conditioning system. The fan can blow at different speeds, depending on how much hot or cold air is required to be comfortable. The blend box can either deliver fresh air from outside, or recirculate air from inside the cabin. Saskatoon auto owners often choose to recirculate air when first starting the vehicle until it starts to either cool down or warm up. In recent weeks it was recommended to only recirculate air in the vehicles due to the forest fires and the high air quality health index.

The next thing the blend box does is convey airflow over the heater core to warm the air, or over the air conditioner evaporator core to chill it – it can also blend both hot and cold to get it just right. From there the blend box can direct the air out into the passenger compartment through the floor vents, the panel vents, the defroster, or a combination. All of this allows drivers to customize the climate just the way the like it.

Some vehicles have different climate control zones, like one for the driver and one for the passenger – or even more zones for the back seat. Additional blend boxes are used for this. Climate controls could be manually adjusted or computer controlled depending on your vehicle.

The blower motor and all of the little actuator motors that open and close the various blend doors can fail and need to be replaced. Most new vehicles come with a cabin air filter. This filter cleans the air before it gets into the blend box. If you neglect changing the cabin air filter, it can get clogged, smelly, and even allow mildew and other microorganisms to build up in the blend box.

At Crestview Auto Service, we can carry out a heating/air conditioning system-cleaning service that will clean and disinfect the system, restoring a fresh clean scent. If you are not getting enough hot or cold air, let us inspect your system, diagnose the cause and set things right. Also, don’t forget to replace the cabin air filter on schedule. Keep in mind; if you live and drive in dusty conditions or where there is a lot of pollen or other pollutants, you may need to replace your cabin air filter more frequently. We are here for you.

Crestview Auto Service
24 23rd St E
Saskatoon, SK S7K 0H5
306-244-6522

Selasa, 21 Juli 2015

Honest-1 Auto Care on WESH- Orlando



Honest-1 Auto Care was featured on WESH- Orlando. Eric Sewell, Honest-1 franchisee, provides some tips on what you should keep in your car for a road trip. With record breaking numbers of travelers on the road for the 4th of July, Eric went through what you should have on hand in case of an emergency. The first is jumper cables because battery issues are common on the road. Eric recommends 15-20 ft. long cables. Another problem that road trippers often run into is a deflating or blown out tire. In order to quickly and safely deal with these issues you should keep tire sealant in your vehicle to help get you off the road and to a safe place, you own tire gauge because gas stations can often be inaccurate, and a lug wrench in case you need to change a tire. Along with these items Eric recommends keeping a flashlight and LED flares to keep you safe in the event of nighttime car trouble.


Watch the segment here

Rabu, 15 Juli 2015

Honest-1 Auto Care on WVLT- Knoxville



Honest-1 Auto Care was featured on WVLT- Knoxville. Summer is a busy season for road travel, and with a record number of drivers set to be on the road for the 4th of July, Tony Bowman, an Honest-1 franchise, offers some safety tips so you are ready for any situation you meet. Tony lays out the five most important things to keep in your car to be prepared. The first is a tire gauge to check your tire’s pressure. This is a common problem you see on the road and having the right pressure can improve traction when you’re driving. You should also keep in case of emergency items like jumper cables, a first-aid kit and water. In case of a flat or damaged tire keep some tire sealant on hand so you can get to a safe place and a properly-sized lug wrench to change your tire.


Watch the segment here

Selasa, 14 Juli 2015

Auto Maintenance Basics: Anti-Lock Brakes



There’s a common misconception among Saskatoon drivers that Anti-Lock Brakes help you stop faster. That is not always the case on loose gravel, wet roads or snowy surfaces. Anti-Lock Brakes, in fact, are designed to help you maintain control of your vehicle in an emergency braking situation.

Imagine you are driving on a wet Saskatoon road. You need to slam on your brakes and your rear wheels lock up. Chances are good that the rear end of your vehicle will try to pass the front end and you can easily lose control. What would happen in the same circumstance if your front wheels locked up? Well you certainly would not be able to steer properly and your front end would go to wherever gravity leads it. The Anti-Lock Brake System (ABS) modulates your brakes on and off as many as 15 times a second. This keeps your wheels from locking up while providing the greatest amount of braking possible. You are better able to steer your vehicle and maintain control. Saskatoon motorists often talk about the 3 S’s of Anti-Lock Brakes: Stomp – Stay – Steer. Stomp on the brake, Stay on the brake, and Steer normally.

Modern ABS utilizes a computer to receive information from sensors and control the anti-lock brakes. There are wheel speed sensors at each wheel reporting back to the computer which can then decide when to activate the anti-lock brakes on the wheel or wheels in need.

So what affects how well the ABS works? First, the condition of your brakes: If you brakes are worn or not working properly, the ABS will not be able to do its job as effectively. A brake inspection at Crestview Auto Service in Saskatoon will let you know if your brake shoes/ pads are in good condition, if there are any mechanical brake issues and if your brake fluid and power brake system is in need of service. Proper brake fluid maintenance helps keep the brake control module in good working order. There can also be problems with the various sensors and the wiring that sends the messages to and from the computer. And of course, your tires need to be in good condition in order to have enough traction to start, stop, and steer. Worn tires are a big problem for ABS and Stability Control Systems.

The ABS is the foundation of Stability Control Systems, providing the vital information needed for stability control as well as to strategically brake a wheel when needed, so making sure your ABS is working well is very important. Also, the rolling diameter of your tires is one of the factors on which the computer uses to base anti-lock decisions. If you buy tires that are more than 3% larger or smaller than the tires that were installed at the factory, the ABS and Stability Control systems will not work properly. The computer can be recalibrated for the new tire size so that the systems have the correct information.

When you start your vehicle, the ABS light will briefly illuminate on the dashboard. If the system detects a problem with itself, the light will stay on. That is your cue to bring your vehicle in for an inspection to determine the problem. Crestview Auto Service is your partner in keeping this important safety system operating as it should.

Give us a call or book online at www.crestviewautoservice.ca

Crestview Auto Service
24 23rd St E
Saskatoon, SK S7K 0H5
306-244-6522
#brakes #tires #trustedsaskatoon #driving #YXE

Rabu, 08 Juli 2015

Honest-1 Auto Care on WBTV- Charlotte



Honest-1 Auto Care was featured on WBTV- Charlotte. Gregg Leftwich, and Honest-1 franchisee, will be opening the first Honest-1 Auto Care in Charlotte later this month. Oftentimes customers feel like their auto repair shops are being less than transparent when it comes to their methods, pricing, etc. At Honest-1 Auto Care, opening at 9200 Monroe Road, their philosophy centers on being customer-centric, educational and transparent.

With a record-breaking travel weekend for the 4th of July it is important to be prepared on the road with these five items to ensure safety in case of an emergency or mechanical issue: tire gauge to check air pressure, tire sealant for roadside emergencies, a properly-sized lug wrench to change a tire, jumper cables, and a “Just In Case” kit chalked full of emergency items like a first aid kit, flashlight, water and more.


Watch the segment here

Selasa, 07 Juli 2015

Pre Purchase Inspection of Cars

A beautiful dropped Bentley like this would be a fine addition to any collection

Experts agree - If you’re looking for a pre-owned high end car – of any vintage – you are well-advised to get a pre-purchase inspection.  In the real estate trade many banks won’t grant a mortgage to a home that has not been inspected and given a clean bill of health.  It’s a mystery to me why auto lenders don’t impose the same sort of rule with high-value cars. 

Interior of a Rolls-Royce Corniche S (c) J E Robison

Most home inspectors are certified or licensed and they have a set of standards they adhere to in the course of their work. Unfortunately, auto inspectors do not have licensing or standards that apply to this situation.  Most states license collision damage appraisers but that’s a totally different job.  Some states license mechanics as well but that does not say anything about their knowledge of a specific brand.  And fixing the mechanical problems isn’t the same as evaluating the whole vehicle. Dealerships may be of help, but their capabilities are often limited to current-generation cars and they tend to have a focus on quick maintenance and warranty repair, which has little to do with collector car evaluation.

The other issue with dealerships – and this is not too well known – is that looking cars over for problems kind of goes against what the manufacturer tells them.  One of the things carmakers watch closely is the stream of warranty repairs from their dealers.  Most manufacturers discourage dealers from looking for problems; they are supposed to respond to customer complaints but they are not supposed to go looking for little things to fix in warranty, unless they are safety hazards.

That makes sense from the manufacturer perspective, as they want to keep costs down.  But that and the fact that dealer technicians are mostly paid on a piecework basis means the techs have every incentive to whip through a job as fast as possible, and small issues that are unmentioned by the driver go ignored.  That’s not what you want when checking a complex old car.

Ideally you want an inspector who is a recognized expert on cars like the one you want to buy.  Inspecting a 1995 Rolls-Royce is very different from inspecting a 1995 Chevy Silverado.  A good used car appraiser can judge the originality and condition of paint on any car, but someone who is accustomed to “ordinary” cars may dramatically underestimate the costs to repair cosmetic flaws in Rolls-Royce or other high end vehicles.

Mechanical inspection is much more specialized and brand specific.  A successful inspection is predicated on knowledge of what goes wrong with particular makes and models.  This is particularly important when a manufacturer model line undergoes significant technological change.  For example, a technician who was trained on the 2003 and newer VW-based Bentley would have little to guide him when inspecting the servo brakes on a 1965 Bentley, which uses totally different systems.

My suggestion is that you look for an inspector on the forums of the marque club for the car that interests you.  For example, a prospective Rolls-Royce buyer would do well to join the club – www.rroc.organd ask about inspectors in the area on the club forums.  An endorsement from several club members would mean more to me than an ad from the Internet.

If the car club can’t point you to an expert, your best bet will be to find a qualified and impartial service facility and engage them to evaluate the car.  Thanks to the Internet it’s easy to look at reviews and descriptions of shops all over the country, and those shops may also be checked out on car club forums.  You could, for example, search out “independent Porsche service in Des Moines, IA” or “independent Land Rover repair in Springfield, MA.”  Call the shop, talk to them, and see what they say.

Once you find a person to inspect the car, it’s important to cover what will be inspected.  Here are some thoughts.  At a minimum, he(she) should . . .
  • Evaluate paint and body condition, including paint thickness; and the originality and completeness of trim
  •  Evaluate the interior condition, particularly with respect to the need for and cost of leather and wood repairs.
  • Evaluate the structural integrity of the car, including the frame and body.  This requires familiarity with the use of wood in coach-built bodies, and the structural weak points of the car under consideration.
  • Evaluate the mechanical condition of the car with respect to things that don’t work, are worn, or possibly unsafe.  This requires familiarity with all the equipment on the subject car and how it should work.  Knowledge of what fails and why is brand and model specific and valuable.
  • If you're looking at a pre-1990s car, you should expect a compression test and possibly a leak down test.  Compression is seldom checked on newer cars because compression is monitored by the engine ECU and a compression loss in a post-1997 car will result in a check engine code.
  • Expect a physical check of suspension, brakes, hoses, and undercarriage.  This will typically require a lift, and it’s one reason we only do these inspections in our shop (as opposed to wherever the car happens to be.)
  • Check the age of the battery, its condition, and the condition of charging and starting systems.  On a collector car look for a battery tender and possibly a cutoff switch.
  • Review the service records for the car and look for exceptionalities.  Also look to see if the car was cared for properly and what services may be due now.  Compare the written record to the observable evidence of the vehicle.
  • If you are looking at something exotic and fairly new a well-connected inspector may be able to access manufacturer service records.  They may also access the as-built record and compare that to the car’s appearance now.
  • The inspector should drive the car and evaluate its function on the road.  Does it feel right?  Is it free of rattles and annoyances?  Does it perform as it should, without overheating or showing other signs of trouble?
  • Look for the manuals, tools, and other little bits that came with the car when new. The more of that you have, the better in the collector world.  The inspection report should tell you what's there and what's not, and if there are any additional materials (car cover, sales literature, etc) that should be mentioned.  On a car like the Corniche S Rolls in the photos below you would spend several thousand dollars to replace missing manuals, tools, and key fobs. So be sure the inspector pays attention to that.
  • If the car being evaluated is newer than mid-90s, you should expect a scan of electronics and a report on issues that the scan reveals.  This would include fault codes, odometer discrepancies, changed modules and anything else unusual.  Note that a manufacturer specific scan tool is needed for this level of inquiry; the inexpensive generic OBD scanners won’t give this detail.
  • Compare the car to others of its kind – is the vehicle under study better than 90%, or just average? Why?  This requires extensive knowledge of the car line and model under study.


Don't forget the little things - owners manuals and tool kits for example

Here at Robison Service we produce a written inspection report backed up with photos, and I would expect the same in any intensive inspection.  But keep in mind that time is money – a really thorough inspection backed up with a well-documented report may cost you 6-8 hours of labor. Checking everything I list above is not a quick casual thing. That said, you don't always need that extensive a check. In some cases you may be well enough served by paying for 1-2 hours of the inspectors time and a verbal report.

When we inspect complex cars like Rolls Royce I tell potential buyers that I might reject an obviously unsuitable or problem-filled car in an hour's time but a thorough evaluation of where to go next on a promising car might take be 4-5 hours more as we check hydraulics and do other time consuming tests.  

I encourage is to have the seller present when the car is inspected, and I recommend you ask the inspector to present his findings to the seller.  That way you have less chance of a seller disagreeing with what’s being reported – he can disagree right then and there and a good inspector will support his position or recognize his error.

I hope this gives you a sense of what’s involved in a comprehensive pre-purchase inspection, and how to get one done.  The biggest problem – once you get outside the big cities – is finding qualified technicians to do the work.  If you are making a major investment, don’t hesitate to pay the costs to transport the car you are considering to someone really qualified to look it over.  And if the seller refuses when you offer to pay costs there (and back if needed) . . . consider that a big red flag. 

This process is often complicated when the car is in an auction environment.  At a Kruse or R-M style live auction you can usually arrange to inspect the car at the auction facility in the days before the sale, but the inspector will have to go to the vehicle and that may limit what they can check in the absence of a workshop and lifts.  When the car is on eBay there is no telling what the inspection environment may be.  Some cars will be at dealerships while others are at homes.  Sellers may or may not be responsive to your request to bring a car to a shop for inspection in an auction environment.

Depending on the complexity of the inspection and the detail of the report, an inspection like I describe may cost anywhere from $150 to $1,000+. If the inspector has to travel to the car or the car must be brought to the inspector those costs will accrue too.  Expensive as that may sound, it's a lot smarter to spend the money in due diligence than it is to pay top dollar for a piece of eye candy that falls apart as soon as it lands in your driveway.


It’s a buyer beware world out there, folks. Know what you’re getting.



(c) 2015 John Elder Robison
John Elder Robison is the general manager of J E Robison Service Company, celebrating 30 years of independent Rolls-Royce and Bentley restoration and repair specialists in Springfield, Massachusetts.  John is a longtime technical consultant to the RROC and other car clubs, and he’s owned and restored many fine vehicles.  Find him online at www.robisonservice.com or in the real world at 413-785-1665

Reading this article will make you smarter, especially when it comes to car stuff.  So it's good for you.  But don't take that too far - printing and eating it will probably make you sick.

Why do wheels need to be re-torqued?


Re-torquing wheels after vehicle servicing

When you bring your vehicle to our repair shop, if we have had your wheels off of the vehicle, we will ask you to return so we can re-torque the wheels. Your invoice will also have a statement on it advising that the wheels need to be re-torqued. You can do this yourself if you like, but if we were the ones to work on the car we do this at no charge to you. We always use a torque wrench to tighten your wheels when we re-install them. This is more of a safety concern now than it was 20 years ago. Vehicles are much more reliable today, but they are made with lighter materials and some of these are very fussy about how they are put together. Even a slight decrease or increase in the tightness of bolts and nuts can have adverse affects, in that they can loosen or they can break. 

Occasionally a customer will come into our auto repair shop with a concern of a noise; once in a while we find loose lug nuts that hold the tires and rims tight to the car. This usually happens shortly after they have had the vehicle in for servicing somewhere and the wheels were off or they have taken the wheel off themselves. Most automotive shops will use a torque wrench to tighten the wheel and this is the best way to make sure the nuts are tight but not so tight that the wheel studs break from too much pressure on them. Some vehicles are more prone to having the lug nuts loosen and will need multiple re-torquing to make sure they stay tight.

Loose wheels don’t happen often, but to be safe, have your wheels re-torqued within the first 100 KM after they have been put on. It is the responsibility of the vehicle owner/driver that this is done. Loose wheels can cause a lot of damage to your car and potential injury to you and others. It doesn't take long to re-torque wheels and could save you a repair bill and a big headache.

www.crestviewautoservice.ca
(306) 244-6522

#lugnuts #tires #wheels #torque #safety

Rabu, 01 Juli 2015

Honest-1 Auto Care on WTTE- Good Day Columbus



Honest-1 Auto Care was featured on WTTE- Good Day Columbus. With a record-breaking number of drivers hitting the road for the holiday weekend, Honest-1 Auto Care franchisee Danni Diol came on Good Day Columbus to offer the five most important things to keep in your car for a safe and successful road trip. It is important to be prepared as you hit the road this season with a properly sized lug wrench, jumper cables (which people often forget during the summer months), tire sealant and a tire gauge, a first aid kit and emergency blanket, snacks and water. With severe weather, the holiday and summer road construction you can prepare for your road trips by having your car regularly checked and by keeping these times on hand.


Watch the segment here