Senin, 28 Januari 2013

Why Do I Need My Headlights Restored?


Headlight Restoration




Polycarbonate plastic is found on most headlight assemblies on all major vehicles. This material even though it is generally durable, this porous material makes it open to environmental defect. Instead of replacing your headlight assembly completely headlight restoration services like the one offered at Rick's Complete Automotive may become an alternative to saving you money!

Vision and safety regulations allow for every vehicle to have the most effective light vision available in today's technology but with a headlight surface not allowing your expensive LED headlights to shine through it's lens by design this may leave you prone to an accident. Not being able to see what's in front of you with bad conditions such as rain, snow, or fog can really mean the factor of keeping you on the road or not. This leaves it up to the responsibility of every vehicle owner to schedule regular appointments with a specialist at Rick's Complete Automotive.

Who said to have to do anything or even replace a hazy headlight? Generally as new headlight assembly can run you anywhere from one-hundred and fifty dollars to two-hundred and fifty dollars, but we can restore your original headlights for twenty-five dollars.  As long as your vehicle's headlights can still be restored, a specialist here at Rick's Complete Automotive Services can do the job and save you money at the same time.


NEVER DRIVE BLIND, ESPECIALLY AT NIGHT.
PUT YOUR SAFETY FIRST, ALL OF THE TIME

Schedule an appointment today at Rick's Complete Automotive located at 6560 Railroad Ave. Forestville, CA 95436. (707)887-1641.








Kamis, 24 Januari 2013

SE Automotive (NIGERIA)



We have a staunch dedication to design quality, with design being defined as fitness for purpose. Today, a car that is fit for its purpose must achieve and surpass the competition on 3 specific quality targets:
  • Aesthetic Value
  • Mechanical durability
  • Functional relevance

These are the cornerstones of the SE Automotive brand. In order to build this brand, SE Automotive must follow a process of product and process development. This involves beginning with a low volume product, which inevitably means a high price and exclusivity.
Segun Akin-Olugbade's company webpage.


Segun Akin-Olugbade (CEO/Director of Development) is the brain behind SE Automotive, and responsible for a large part of the set up strategy of the organisation. He is also responsible for the design of the SE Dau, the company’s first car, and the quarter scale SE Dau Prototype. Segun has experience in automotive design and engineering from Perei Engineering (UK) Limited, where he worked as a Concept Development Engineer. He also engaged in a number of live, industry design projects at Coventry University, and Loughborough University in the UK, where he obtained a BA in Automotive Design, and a BEng in Automotive Engineering respectively.
Segun’s vision is for an industrialized Nigeria, supported in large part by a sustainable automotive industry. In addition to creating a formidable automotive business, Segun is also looking to pioneer skills growth in advanced automotive design and engineering development, by introducing state of the art methods of Computer Aided Design (CAD) and Manufacture (CAM). In addition to putting Nigeria on the automotive development map, this will give engineers a broader range of skills, which they can use to create opportunities for themselves by innovating in their respective environments.


Tanzania Automotive technology center (TANZANIA)




Tanzania Automotive Technology Centre (TATC). Established with an idea of creating a Centre of excellence in Tanzania to advance technology innovations, with the ultimate aim of attaining self reliance in technology relevant to the economic and social well-being of our country.


TATC was established in 1985 by a presidential decree, as a Research and Development Government Institution under the Ministry of Defence and National Service. The Centre is wholly owned by the Government of the United Republic of Tanzania.
Establishment Purpose
To create a Centre of Excellence in Tanzania to advance technological innovations, with the ultimate aim of attaining self reliance in technology relevant to the economic and social well being of the country.
Building of TATC
TATC was built through heavy Government investment , leading to;
• Technology acquisition through ‘technology transfer initiatives’ between Timoney Technology Ltd of the republic of Ireland and the Government of the United Republic of Tanzania.
• Construction of the TATC technology infrastructure from a green field

Principal Functions of TATC
To adapt existing engineering technology to alleviate some of the existing problems in transport, agricultural machinery and industry (implementation or pursuit of this function results into adapted or reverse engineered technologies)
To design and develop for production, vehicles, plant and machinery suited to the needs of Tanzania. (implementation or pursuit of this function results into TATC developed technologies).
To conduct research in materials for use in field of mechanical engineering (Material research, metal plastics, rubber, composites.)
To provide consultancy services in the fields of electro-mechanical engineering (industrial consultancy services)
To act as a high technology training Centre.
To conduct quality assurance of land equipment and machinery purchased by the Government.
To undertake any special engineering tasks as directed by the Government
 Source (TATC)  http://www.tatcnyumbu.org




Mobius 2 (KENYA)

  

Mobius Two omits many non-essential features while maintaining essential functionality. It has already been driven over 2,500 Kilometres around Kenya on varied terrain and proved its rugged capability.

Mobius Two is designed for driving on rough African roads. The body has a 35cm ground clearance, rugged integrated skid plate and large tyres. This is combined with the power to weight ratio of a 4x4 for optimum off-road performance.
Mobius Two is versatile. The body and suspension are capable of transporting large or heavy loads long distances. The rear fold-up seats can be configured for a total of six or eight persons; they are removable, leaving a flat cargo space comparable to a pickup truck. Mobius has a rated rear load of 500kg.
Lasting structural rigidity is ensured by the tubular steel chasis, which incorporates design elements of high perfomance and racing vehicles. Aluminium honeycomb crumple zone bumpers absorb impact forces in the event of a collision.
Mobius uses proven components and is constructed so that parts can be easily serviced by mechanics. Repairs to the steel frame can be carried out using a simple welding procedure.
Source Mobius motors http://mobiusmotors.com





Nigerian woven car body design (NIGERIA)



The cane-made car above is a display of creativity and ingenuity at its peak, as the Peugeot pick-up was woven with cane from the roof, to the bonnet, bumpers, and down to the rims of the tyres!

A middle aged man, tall who introduced himself as Mr Obaniyi Adeoye Ojo who is responsibille for the re-designing of the Peugeot pick-up      said he just wanted to do  something unique and promote Nigerian culture the more.
Very unique I must say!


Source: http://www.ghanacrunch.com/2012/photo-nigerian-man-makes-car-with-woven-cane/#ixzz2IvwJUqZb


Team Nigeria in motorsports debut (NIGERIA)


 
Could motorsports become a major industry in football-obsessed Nigeria? It will be if one Nigerian businessman has his way. 

 London-based entrepreneur Ribi Adeshokan has entered his country into the lavish and highly-competitive world of car racing and has ambitious plans to drive African motorsport and build a multi-million dollar racing industry on the continent.

Called Nigeria Racing Eagle (NRE), the team says it hopes to compete at major motor racing events over the next few months, including the FIA GT3 series and sports car endurance races.

"My philosophy is whatever I want to do, I go for the best," Adeshokan, team principal and owner of NRE said Monday, moments after unveiling a green and silver Audi R8 LMS as the team's car at the Africa Village, a London Olympics exhibition site designed to highlight the continent's cultural, artistic and sport assets.

Adeshokan says his team will proudly "fly the flag of Africa," being the first Nigerian racing team to represent the continent at world motorsports.

Source (CNN) 

Image gallery on the link below

Nigerian undergraduates win world motorsport competition (NIGERIA)


Nigerian undergraduates (christened The NUTA_BOLTS Team) who are currently studying for a various Engineering degrees at the Anambra State University were Nigeria’s sole representative at the annual event whose 2012 series took place in Silverstone Circuit, Northampton, UK. Six other African universities (five from Egypt and one from South Africa) also participated in the competition the competition that drew contestants from 222 universities around the globe.

The Formula Student is an educational motorsport competition, run by the Institution of Mechanical Engineers (IMechE), in partnership with various well-known companies in the industry. It promotes careers and excellence in engineering, by challenging university students from across the globe to design, build, develop, market and compete as a team with a small single sitter racing car. It provides the students with a real-life exercise in design and manufacture and the business elements of automotive engineering. It teaches them all about team work, working under pressure and to tight timescales. It demands total commitment, lots of late nights, and many frustrations and challenges along the way, but the net result is the development of highly talented young engineers.

The competition starts at the beginning of the university year when teams start to design their cars. They are to assume that a manufacturing firm has commissioned them to produce a prototype car for the non-professional autocross or sprint racer sales market with the intention of selling one thousand units.  To encourage innovation, there are very few restrictions on the overall vehicle design. Successful teams are those who produce a car that is not only fast and reliable, but also low in cost and easy to maintain. The car’s marketability is also enhanced by other factors such as aesthetics, driver comfort and the use of common parts.
The competition offers team the opportunity to undertake real-life challenges and logistics, and develop the skills they will need when they go on work in industry.
For the NUTA_BOLTS boys whose design was judged the 7th Overall Best, fame didn’t just come. They have been working laboriously since 2008 forging seemingly trivial but ingenious designs. The first design they embarked on then was that of a unique Nut and Bolt which gave them the name (The Nuta_Bolts). They went further designing many other components like the key-holder-opener using the conventional lathe machine, they also modeled the speed cone of a lathe machine and later designed a miniature camera. They were on plans to designing and producing a multiple Grinding Machine when the IMechE team visited their school.

Twenty one in number, the team, whom Professor Bamiro (former Vice Chancellor of the University of Ibadan) suggests would make good technopreneurs is armed with strong willed and motivated students from the fields of Mechanical Engineering, Architecture, Electrical & Electronics Engineering, Civil Engineering and Chemical Engineering organizing themselves as a modern company.

The team according to team Leader, Onyenanu Ifeanyichukwu “has already kicked off preparation module to build the car and race it in Silverstone by July, 2013.”
As contained in the communiqué issued at the end of the 21st COREN Assembly where the NUTA_BOLTS team presented a lecture, the government has been “requested to financially support the team to enable them develop, fabricate and commission the race car”.

 (Source: The Engineering Network)

Jumat, 18 Januari 2013

Land Rover Defender restoration at Robison Service



Here at Robison Service, winter time is restoration time for many of our clients and their cars.  We take projects in the fall with the hope that we'l scoot them out the door - finished - by the time spring weather arrives, a few months from now.

Here's a glimpse into some of our activities in the Land Rover world

This is an engine from a 1994 Defender that's undergoing a frame-off restoration.  After ensuring the core was good, and no rebuild was needed, we've stripped this motor to the long block and removed all the discolored and salt spotted aluminum.

We bead blasted everything, and finished the aluminum in a clear ceramic that looks like fresh aluminum, but it won't fade or discolor.  We finished all the black in semi-gloss powder, and changed the gaskets, hoses, and ancillary parts . . .



We did the same thing on the axles, stripping them to the casings, which were cleaned and powder coated.  Land Rover left a lot of this metal bare when the vehicles were new, but we finish it all.


Here's Joe Brick, assembling away . . .


This Defender got a new cross member and we remade the tubular rear bumper.  The old parts were totally destroyed by rust


Here's the frame-off restoration that I mentioned above.  We've just installed the drivetrain, and built up the axles and hubs.  A set of wheels and it's ready to roll!




This Series truck is here for wiring repairs, and eradication of rodents . . . .


Here we are mocking up a new set of jump seats for a Nantucket beach Defender . . ..


Here are the newly built brakes and hubs.  The actual hub was bare metal originally, and we finished it in flat black ceramic for looks and corrosion resistance


Here's a rebuilt and refinished swivel . . .






We've had a lot of trouble with steel fuel lines rotting away.  These stainless lines are a bear to bend and fit, but they'll never rot!


Here's Joe working on a wiring harness - something that's a lot easier to do when there's no truck in your way


How do we keep track of what's tight and what's loose?  We mark all the fasteners with paint once they are torqued.  Then an inspector can look under the car and pick out unpainted bolts.



We use high heat ceramic to finish the brake drums, and black paint and u-joints for the driveshafts


Here's a resealed and prepped engine, seen from below


A recent arrival . . . .




 Swapping a rear main seal in a V8 is a lot easier when the motor is on a stand . . .



Paul has a pair of rusty battery covers, ready to blast and powder coat.  We'll be able to save them.




Meanwhile, we fit the sound deadening panels and rubber for the floor . . . . 



And so goes another week at Robison Service


Are you thinking of a Land Rover restoration project?  Give John a call, 413-785-1665.

Visit our regular website at www.robisonservice.com

Visit us for real at 347 Page Boulevard, Springfield, Massachusetts












Kamis, 17 Januari 2013

99 Auto Repair Reviews & Counting!

"We would like to thank Norm and Heidi once again for their honesty, quality customer service and above all "Master Mind" service! Norm has provided us with knowledgeable, quality work (rebuilt our engine, etc..) for almost 10 years. Recently we took our 2005 Trailblazer in for an ongoing problem and was not charged after not finding a problem for what we call "a mystery" problem. Thank you for not charging us and for your overall TRUE HONESTY! If it had been anywhere else, we would have been charged something. We will send all our family and friends to you from here on out because you are one of a kind.

Thank you and God bless your family!"

Sincerely,
Mike & Cindy Britton

More auto repair reviews about Mastermind Enterprises in Denver

Thank you to all of our amazing customers who took the time to share with us how much you appreciate all we do in repairing and servicing your vehicle. Thank you for supporting our family auto repair shop in Denver. We are happy to be the honest mechanic in Denver.

Selasa, 08 Januari 2013

BAD IGNITION COIL INDICATORS

A bad ignition coil is one of the things outside of the various other engine management items that can cause your vehicle to run poorly. This article will help you know what an ignition coil does, and what signs your should look for before the ignition coil goes bad.

How does an Ignition Coil Function?

Spark plugs within your engine explode the fuel combined with the spark the spark plugs produce in the cylinder area of the engine and propel your car forward. This simple task given by the spark plugs rely on a more complex ignition system to fire them at exactly the right time and with the proper intensity. The ignition coil relays power from the battery and then converts the increased voltage to a high level creating spark in the plugs.


What is an Ignition Coil Design?


  • Ignition coils are made up of components. The first part by design is the primary coil, and the second part is called the secondary coil. Battery current runs into the primary coil creating magnetic field. This magnetic field causes a current to transfer onto the secondary coil. By this design the voltage in the secondary coil is much higher than that of the primary coil.


    Indicators Of a Bad Coil


    • When your ignition coil fails this will prevent the engine from turning over and starting or if your car happens to be running at the time of failure you could be on the side of the road calling a tow truck since this component will stop the engine from running entirely. This is due to the fact that no current will reach the spark plugs enough to deliver combustion moving your vehicle forward. In some cases, an ignition coil that is failing will still provide some current to the plugs, but it might not be enough for a full spark, which is needed by the vehicle. The result will be a poor running motor. The battery voltage current must be accurate and consistent within the coil or the car will run rough. In this case we had a customer come in with a coil that exploded and you could see the voltage inside the coil making spark. This video displays a worst case possible yet still allows the vehicle to function. 

      If you think your vehicle is running poorly have us check out the ignition system at Rick's Complete Automotive located at 6560 Railroad Ave. Forestville, CA 95436 or call (707)887-1641.



Minggu, 06 Januari 2013

So you want to buy a car . . .


Mercedes-Benz service. © copyright JE Robison


We’ve all heard expressions like, “pretty low miles on that car, if you believe the odometer.”  How do you know if an odometer reading is true?  My first and best advice is to look at the whole context of car, environment, and deal.

One-owner cars offered by franchised dealers of the same make are usually the safest deals, and they often come with certified warranty, but they are also often more expensive.   Late model used cars at reputable used car lots are also often safe, because of the source.

You see, many 2-3-4 year-old cars find their way into the used car marketplace simply because their original lease ran out, or the original buyer defaulted on his payments.  Those cars often have nothing whatsoever wrong with them; they just aged out of their former homes.

One problem to look for in lease cars is neglect, or substandard service.  When someone knows they are only renting the use of a car for a set period they don’t tend to care for it as if they’d own it forever.  Lessee cheapness and neglect often comes back to bite unsuspecting second owners, and it often happens much later in the car’s life when they have no recourse.

Older used cars are even more of a problem, because they tend to be sold off when they have problems the former owner doesn’t want to fix.  In my experience, very few people trade in a 10-year-old car because “they just want a new one.”  They may say something like that, but underlying the words is usually a mechanic’s warning that the car needs a few grand in work soon, so they decide to bail.  Such cars are often patched up and resold, leaving the new owner with a pile of unexpected repairs.  I suggest you examine any used car that’s more than three years old very carefully for that reason.

The best older cars come from sellers whose circumstances may have suddenly changed.  A guy who just got a promotion and won a company car may be a great fellow to get a 7-year-old BMW from.  Estate sales can be good too.  Repo's are often cheap, but also often neglected, damaged or both.

The more owners a car has had, the more suspicious you should be.  There is little incentive for an owner to alter the odometer while he owns a car.  The incentive appears when it comes time to sell, and the more times a car has been sold, the greater the chance someone engaged in deception.

Cars that were leased are more likely to have incorrect odometers.  The reason: many leases had stiff penalties for driving cars more than 10 or 12 thousand miles a year.  Some motorists – realizing they will owe thousands in mileage penalties at lease turn in – will pay hundreds to roll the odometer back instead.

Odometer fraud used to be a crime of professionals.  Crooked car dealers would buy high mileage vehicles at one auction, shave forty or fifty thousand miles off their odometers, and resell them for a substantial gain at another auction a few hundred miles away.  Integration of auction databases and better record keeping largely put an end to that practice.

Today those crooked dealers are more likely exporting the cars they “clock” or set back because other countries seldom check odometer records back here in the US.  Their activity props up auction prices on high-mileage luxury cars, but that support comes at the expense of the ultimate retail buyers, distant though they may be.

Today’s lease car odometer fraud is much more likely to be an individual crime, which makes it much harder to detect.  When a person leases a brand new car, and turns it in three years later with 32,000 miles there is no way to tell if it once had 60,000 instead.  Or is there?

There’s no title history to follow, but many cars have service histories if only you can find them.  Services like CARFAX are doing a better and better job of collecting records from state inspection stations, repair shops, and other business that record mileages on cars they see.  Discrepancies in their reports can tip you off to an odometer problem, but you have to be careful because a casual reading at state inspection is more likely to be erroneous than a sworn odometer statement when a car is sold.  A car that had 30,000 miles in one inspection, 80,000 at the next, and 40,000 today could well be a case of observation error, and not fraud.

The best situation is to buy cars from sellers who are up front, and who have full service records for the life of the vehicle.  That way you are assured of both the odometer reading and the quality of care the car received.  Unfortunately, that situation is not all that common in the car world.

Given that reality, I strongly encourage anyone buying an expensive used car – classic or otherwise – to have it inspected by a professional.  Look for wear in the seats and on the body (or evidence of recent fixing-up) that might suggest high mileage.  Look at tires, belts, batteries and other components to see if they are original, matching, and correct.  There are a thousand little clues that an expert may spot that suggest one car is good and another should be avoided.

Finding a qualified inspector presents its own challenges, since there is no good system for certifying expertise in any particular make or model.  The best cure for that is still to establish a reputation with a shop you can trust, and buy local – restrict your search to cars the shop you trust can check out. 

In the end, that is your best assurance.  A local shop that does all your work – and does it right - has a strong incentive to be vigilant when inspecting a car on your behalf.  After all, if the car has big problems after you buy it – and they did not predict the trouble – you will likely hold them responsible and they may lose your business.  A distant inspector knows he’ll never see you again, and has no tie to you beyond the inspection fee you paid.  With no disrespect to distant inspectors intended, who do you think will be more careful?

 © copyright JE Robison


John Elder Robison is the founder of J E Robison Service in Springfield, MA.  They are independent specialists in fine European automobiles and they’ve been known to dabble in other makes from time to time.  Find them online at www.robisonservice.com