What is important to know when removing wheels?

March 21, 2012

-Loosen wheel nuts before lifting vehicle off the ground.
-Raise vehicle only a few centimeters (one inch) from the floor when doing operations on a freewheel or frame-contact lift.
-Block a vehicle securely on a lift to prevent rolling.
-Remove or replace the wheel from a squatting position. Minimize back strain by not bending forward.
-Do not place hands or wrists under wheel well while vehicle is suspended.
-Do not service split rim-type tires unless specifically trained in their repair and hazards.

What are some tips for inspecting tires and rims?

Clean rims to ensure that all dirt and rust are removed from lock ring and gutter.
Check all parts. Discard any damaged, worn or corroded components after removal.

When using a tire-changing machine, what should I know?

Lock wheel hold-down device securely.
Remove valve core.
Keep hands clear of pinch-points.
Use the correct tools.
Use proper lubricant to seat tire.
Do not mount damaged tires or wheels.

We will be having a customer
"Appreciation Day"Revised Date
Saturday April 28th from 9am - 3pmMore information to follow.... 
RJ PICK UP SERVICE
241A Main Street North
Uxbridge, Ontario, L9P 1C3
Phone 905-852-4238
Email: EMAIL US








TIRECRAFT!!   We're driving towards a cure with every car we serviceshow your support and go pink!!

What should I do when servicing vehicles?

March 20, 2012


Here are some safety tips for you to keep in mind when you are working are your vehicle

-Look completely around and under vehicle and check for brake pedal pressure before moving the vehicle.

-Have all bystanders stay in a safe area until the driver has stopped the vehicle.

-Move vehicles at a low speed and in low gear – especially up and down ramps.

-Use a guide when moving the vehicle in reverse, near blind corners or narrow areas.

-Park on a level, hard surface to make repairs.

-Chock and block the wheels to prevent movement during servicing.

-Disconnect battery and discharge any capacitors before starting to work on vehicle.

-Secure the trunk and hood to prevent them from falling on you when you are working underneath them.

-Inspect a running engine with extreme caution. Avoid contact with fan blades and belts.

-Only do work or repairs on a cool engine. Hot metal and fluids will cause burns.

-Avoid working around hot equipment such as exhaust pipes and manifolds. If such work is absolutely necessary, cover the hot equipment with some insulating protection to prevent getting burned.

-Always wear eye protection when working on a vehicle or when using power tools.

-Store the keys in a secure place when the vehicle is not in use or not attended.

RJ PICK UP SERVICE
241A Main Street North
Uxbridge, Ontario, L9P 1C3
Phone 905-852-4238
Email: EMAIL US

We will be having a customer
"Appreciation Day"Revised Date
Saturday April 28th from 9am - 3pmMore information to follow.... 

TIRECRAFT!!   We're driving towards a cure with every car we serviceshow your support and go pink!!

What should I know when servicing brakes and clutches?

March 9, 2012

Some important safety steps to protect you when you are servicing brakes and clutches

-Clean and service brakes in a separate work area.

-Use approved respiratory protection when necessary.

-Remove dust with a vacuum equipped with a high efficiency particulate air (HEPA) filter.

-Wet assembly down with low pressure water or gentle spray when a vacuum cleaner is not available. Wipe clean with a damp cloth.

-Collect the washings and dust on floors and around equipment using a vacuum cleaner with (HEPA) filter or wet sweeping for proper disposal.

-Do not use compressed air or dry brush to clean brakes. Do not bang the drum to remove dust.


  We will be having a customer
"Appreciation Day"Revised DateSaturday April 28th from 9am - 3pmMore information to follow.... 

RJ PICK UP SERVICE
241A Main Street North
Uxbridge, Ontario, L9P 1C3
Phone 905-852-4238
Email: EMAIL US
TIRECRAFT!!   We're driving towards a cure with every car we serviceshow your support and go pink!!