Sparks created from booster or jumper cables can ignite a flammable mixture of hydrogen in air causing an explosion.
Before using jumper cables:
-Wear eye protection.
-Make sure that the two vehicles are not touching each other.
-Turn off the ignition switches of both vehicles.
-Extinguish all cigarettes, cigars, and other sources of flame or ignition. -Remember, explosive mixtures of hydrogen are always present in the cells of
batteries.
-Remove the filler caps from both batteries to vent the dangerous hydrogen gas. -This is not necessary if the vehicles are equipped with maintenance-free batteries.
-Do not charge or jump a frozen battery.
-Check vehicle/equipment service manual for specific requirements.
WARNING:
When connecting or disconnecting jumper cables, use extreme care in handling the clamps.
Do not allow cables to touch each other, nor to touch the frame or body of either vehicle. This will prevent sparks that can cause an explosion.
-Avoid contact with the revolving cooling fans when disconnecting the cables.
-After removing the booster cables, replace the filler caps on both batteries.
"Appreciation Day"
241A Main Street North
Uxbridge, Ontario, L9P 1C3
Phone 905-852-4238
Email: EMAIL US
Tidak ada komentar:
Posting Komentar